Blue Robotics

WetLink Cable Splice Kit

£20.99

The WetLink Cable Splice Kit allows you to connect two cable ends without any messy potting compounds, molds, or curing time. Install WetLink Penetrators, connect the wire ends internally, and you have a splice ready to go to 500 meter depth!

£20.99

Product Description

The WetLink Cable Splice Kit is a revolutionary alternative to the adhesive-based splice kits that are common in subsea work. Kits like the 3M™ Scotchcast™ Cable Splicing Kits require you to mix and pour urethane potting compound into a mould and wait for it to cure. It’s a finicky process that takes time and leaves lots of room for variation and error.

The WetLink Cable Splice solves that! It’s pottingless, requires no moulds, and has no cure time! You can make a high-pressure cable splice in just minutes.

This kit includes a small box, made with high-strength polycarbonate plastic, with holes on either end for the WetLink Penetrators, which seal to just about any cable with a compression gland seal. To use this kit, you’ll need a few items:

You’ll need:

1 x WetLink Cable Splice Kit (this product)
2 x M10 WetLink Penetrators for your cable diameter

Goodbye, messy potting compound! Hello, WetLink! 👋

Technical Specifications

Specifications

Parameter	Value
Performance
Temperature Rating (air)	-25–60°C	-13–140°F
Temperature Rating (water)	0–40°C	32–104°F
In Air Weight (No penetrators)	64 g	2.25 oz
In Water Weight (No penetrators)	-11.2 g	-0.4 oz
Maximum Rated Depth (seawater)	500 m	1640 ft
Design Lifetime¹	3 years or 500 cycles to rated depth
Tools
Compatible Bulkhead Wrench	BR-100977-010
Recommended Penetrator Installation Torque	3.5 Nm
Lid Screw Size	M3x0.5 - 10
Lid Screw Hex Key Size	2 mm
Physical
Internal Dimensions (Length x Width x Height)	49 x 29 x 20 mm
Thru Hole Diameter	10.1 mm
Mounting Hole Diameter	3.2 mm
Mounting Hole Spacing	32 x 60 mm
Lid O-Ring Size	44 x 1.5 mm
Wetted Materials	Polycarbonate 30% glass-filled Buna-N Molykote 111 compound Stainless steel 316
¹ Design life was used to inform testing in an accelerated environment, does not reflect warranty period.