Buccaneer
BlueROV2
Battery Power Cable Set
Battery power cable set for the BlueROV2 with pre-installed WetLink Penetrators and 5.5 mm bullet connectors.
BlueROV2 (Acrylic - 100m)
The Blue Robotics BlueROV2 is the world’s most affordable high-performance ROV. With a 6-thruster vectored configuration, open-source electronics and software, and plenty of expandability, it’s the perfect ROV for inspections, research, and adventuring. What will you see?
BlueROV2 (Aluminum - 300m)
The Blue Robotics BlueROV2 is the world’s most affordable high-performance ROV. With a 6-thruster vectored configuration, open-source electronics and software, and plenty of expandability, it’s the perfect ROV for inspections, research, and adventuring. What will you see? Remember to complete the ROV you will need to add lights and a tether of the length you require and maybe you would like a reel for ease of tether handling, for power you'll need to add batteries and charger, or even upgrade to the OTPS surface supply system- you'll also need a laptop to run the software on - we can help advise on all these and even build it for you if your in need of any assistance.
BlueROV2 Electronics Enclosure (Acrylic - 100m)
Pre-assembled and tested with the BlueROV2 electronics, this enclosure is ready-to-integrate into your custom ROV frame or other application. It includes the 18-hole end cap with nothing installed. At minimum, we recommend including a Pressure Relief Valve, a pressure sensor like the Bar30 Pressure/Depth Sensor and the Power Cable Set to connect to a battery enclosure.
BlueROV2 Electronics Enclosure (Aluminium - 300m)
Pre-assembled and tested with the BlueROV2 electronics, this enclosure is ready-to-integrate into your custom ROV frame or other application. It includes the 18-hole end cap with nothing installed. At minimum, we recommend including a Pressure Relief Valve, a pressure sensor like the Bar30 Pressure/Depth Sensor and the Power Cable Set to connect to a battery enclosure.
BlueROV2 Frame
This is just the BlueROV2 frame with black HDPE panels, cradles for the top tube, and all required hardware for assembly.
BlueROV2 Heavy Configuration Retrofit Kit
This kit provides the components needed to upgrade to the BlueROV2 Heavy Configuration with two additional vertical thrusters, 6 degree-of-freedom control, increased buoyancy, and external thruster guards. Requires the use of two additional penetrator holes on the main enclosure.
BlueROV2 Heavy Fairing Add-on
Polycarbonate add-on fairing used on the BlueROV2 Heavy configuration. Includes mounting screws.
BlueROV2 Heavy Machined Buoyancy Foam
Subsea Buoyancy Foam machined specifically to fit in the BlueROV2 Heavy add-on fairing. Increases vehicle stability and lifting capacity.
BlueROV2 Heavy Thruster Guards
Outer thruster guards used to protect the thrusters on the BlueROV2 Heavy configuration. Includes anodized aluminum brackets and stainless steel mounting screws.
BlueROV2 Machined Buoyancy Foam
Subsea Buoyancy Foam machined specifically to maximize buoyancy on the BlueROV2. Increases vehicle stability and lifting capacity. Rated to 300 meters (984 ft) water depth.
BlueROV2 Roof Rack
It’s exactly what you think it is: a roof rack for your BlueROV2 to attach more cool stuff! The Roof Rack is made from anodized aluminum and has mounting holes for additional Lumen lights, the Ping360, the Sonoptix ECHO Multibeam Sonar, Newton Gripper, our Watertight Enclosure Clamps, and standard 1/4-20 UNC tripod mounts, plus you can always drill more yourself!
BlueROV2 Spares Kit
This kit contains a number of spare parts that are nice to have on hand for the BlueROV2. The contents of this kit are based on our own experiences and should provide you with most replacements you might need out in the field!
Enclosure Cradles (4″ Series)
The Enclosure Cradles (4″ Series) are used to hold the 4″ Watertight Enclosure on the BlueROV2.
Fathom-X Tether Interface (FXTI)
The FXTI provides a simple but flexible topside enclosure to interface the BlueROV2 to a computer. Contains a USB to Ethernet converter and a Fathom-X board, and offers plenty of options for expansion!
Low-Light HD USB Camera
This digital HD USB camera has excellent low-light performance, onboard compression, and a specially chosen lens to provide fantastic video quality on ROVs and other subsea applications!
Payload Skid
The Payload Skid is a modular frame for the BlueROV2 with mounting points for additional watertight enclosures, lights, and ballast weights. Use it to carry large payloads and expand functionality!
Raspberry Pi 4
The Raspberry Pi 4 Model B is the powerful mini computer used in the Navigator Flight Controller and on the BlueROV2.
Can't see what you need or have a query? Please just get in touch…