Thrusters, Actuators and Lights

T200 Thruster with Penetrator (BlueROV2 Spare) - Clockwise

This T200 comes with a slightly shorter cable and a pre-installed cable penetrator and is a drop-in replacement for the thrusters on the BlueROV2. It’s also included in the BlueROV2 Spares Kit.

T200 Thruster with Penetrator (BlueROV2 Spare) - Counterclockwise

This T200 comes with a slightly shorter cable and a pre-installed cable penetrator and is a drop-in replacement for the thrusters on the BlueROV2. It’s also included in the BlueROV2 Spares Kit.

T200 Thruster

The Blue Robotics T200 Thruster is the world’s most popular underwater thruster for ROVs, AUVs, surface vessels, and more! Its patented flooded motor design makes it powerful, efficient, compact, and affordable. The T200 is in use on thousands of marine robotic vehicles around the world including the BlueROV2.

T500 Thruster

The T500 Thruster is our next-generation underwater thruster with three times more thrust than the T200 Thruster. With a 24V / 43.5A power rating, high efficiency, and ruggedized design, it is an ideal choice for high-power ROVs, surface vessels, AUVs, and more! It comes with a pre-installed WetLink Penetrator for rapid integration into your system.

Subsea Embedded Push Button Switch (Non-Magnetic)

Subsea M10 Embedded Push Button Non-Magnetic Switch is a compact, fully sealed control interface designed for use in underwater systems up to 100 meters deep. Made from corrosion-resistant 316 stainless steel, its non-magnetic construction ensures compatibility with magnetic field-sensitive equipment such as sonar and navigation instruments.

Subsea M10 7-Segment Display

The Blu-Sub 7-Segment LED Display Module is a compact, single-digit readout designed for underwater applications. It features a 0.28-inch common anode LED available in yellow or red, housed in a pressure-resistant aluminum body rated for depths up to 1,000 meters. The module includes an M10×1 threaded interface for secure mounting and comes with a 200mm lead wire and sealing O-ring. A single Blu-Sub Driver Board can support up to four LED Display Modules. An external driver board is required for operation and is sold separately.

Subsea M10 Rotary Waveband Switch

The Subsea M10 Rotary Waveband Switch is a compact, multi-position selector switch designed for sealed underwater enclosures. Supporting 3 to 8 selectable positions, it enables channel or circuit switching without opening the housing. A tactile “click” confirms each position as the knob rotates, and the switch allows continuous 360° rotation in either direction.

Subsea M10 Rotary On/Off Switch

The Subsea M10 Rotary On/Off Switch is a rugged, latching underwater switch designed to toggle power or signal circuits inside sealed subsea enclosures. Featuring a two-position rotary mechanism with tactile feedback and audible clicks, it enables reliable manual switching at depths up to 1,000 meters without opening the housing.

Basic ESC

An electronic speed controller (ESC) is necessary to run any three-phase brushless motor like Blue Robotics’ thrusters and motors.

Basic ESC 500 - BlueBoat

Basic ESC 500 - Standard

This bidirectional speed controller is similar to our original Basic ESC, but suited for the high power requirements of the T500 Thruster, even when in a space with poor airflow and cooling, like inside an ROV enclosure. It comes in two versions: a standard version for most applications and a BlueBoat version for use in the BlueBoat USV.

Lumen Subsea Light (Pre-Connected Sets) (Number of Lights - 2)

These are pre-connected (daisy-chained) sets of Blue Robotics Lumen Subsea Lights, making it easy to install two or four lights with a single penetrator to the watertight enclosure. All lights will respond to a single signal. See here for the individual Lumen Lights.

Lumen Subsea Light (Pre-Connected Sets) (Number of Lights - 4)

These are pre-connected (daisy-chained) sets of Blue Robotics Lumen Subsea Lights, making it easy to install two or four lights with a single penetrator to the watertight enclosure. All lights will respond to a single signal. See here for the individual Lumen Lights.

Lumen Subsea Light for ROV/AUV

A 1500 lumen subsea LED light with servo signal control, daisy-chain connection for multiple lights, and smart over-temp protection.

M200 Motor - BlueBoat - 0.71 meter cable length + M14 WLP

The M200 Motor is a subsea motor designed to run in harsh ocean conditions. It has the same performance as the T200 Thruster, but without a nozzle, making it perfect for use on USVs (like the BlueBoat), AUVs, and in custom projects such as actuators and subsea tooling. It requires a speed controller for operation.

M200 Motor - Standard - 1 meter cable length

The M200 Motor is a subsea motor designed to run in harsh ocean conditions. It has the same performance as the T200 Thruster, but without a nozzle, making it perfect for use on USVs (like the BlueBoat), AUVs, and in custom projects such as actuators and subsea tooling. It requires a speed controller for operation.

Newton Subsea Gripper

The Newton Gripper provides the BlueROV2 and other subsea vehicles with the ability to interact with the subsea environment to retrieve objects, attach recovery lines, or free a snagged tether! Includes everything needed for installation on the BlueROV2.

Propeller Set - T200 Thruster - Black

A set of spare replacement propellers for the T200 thruster. Contains one clockwise propeller, one counter-clockwise propeller and mounting screws

Propeller Set - T200 Thruster - Blue

A set of spare replacement propellers for the T200 thruster. Contains one clockwise propeller, one counter-clockwise propeller and mounting screws.

Propeller Set - T200 Thruster - Orange

A set of spare replacement propellers for the T200 thruster. Contains one clockwise propeller, one counter-clockwise propeller and mounting screws.