Buccaneer
Enclosures, Buoyancy, and Ballast
Cast Acrylic Tube - 11.75", 298mm (8" Series)
This cast acrylic, optically clear tube is for use with 8″ Series Watertight Enclosure.
Cast Acrylic Tube - 11.75″, 298mm (6″ Series)
This cast acrylic, optically clear tube is for use with 6″ Series Watertight Enclosure.
Electronics Tray (4″ Series)
The Electronics Tray provides a convenient way to mount your electronics in a Watertight Enclosure for ROV/AUV (4″ Series) . Compatible with the Camera Tilt System and used on the BlueROV2.
Hex Key Set
This hex key set includes 1.5mm, 2mm, 2.5mm, and 3mm hex keys needed for the screws on most of our products. They are blue to set them apart from your other tools!
Long Hex Standoff
The Long Hex Standoff is 212mm and is used to attach the front bulkhead to the rear bulkhead on the Electronics Tray.
Mityvac Hand Operated Vacuum Pump
This hand-operated vacuum pump with gauge makes it easy to verify the seals on a watertight enclosure. Comes with hose and vacuum adapter compatible with the Pressure Relief Valve and Vent.
Moisture Indicating Silica Gel Desiccant
Moisture Indicating Silica Gel Desiccant that eliminates humidity and prevents condensation within the enclosure.
Molykote 111 - 150 g Tube
This Molykote 111 silicone grease works great to lubricate O-rings and other seals to make sure that they do their job!
Molykote 111 - 6 g Pillow Pack
This Molykote 111 silicone grease works great to lubricate O-rings and other seals to make sure that they do their job!
O-Ring Flange (6″ Series)
This flange with an O-ring seal fits the tube for the 6″ Watertight Enclosure. Comes with O-rings.
O-Ring Flange (8″ Series)
This flange with an O-ring seal fits the tube for the 8″ Watertight Enclosure. Comes with O-rings.
O-ring Flanges - 100 mm (4")
O-ring sealing flange for the 4″ Watertight Enclosures. These are the second generation of flanges with a locking cord and anti-rotation feature. Compatible with dome end caps, flat end caps, and custom end caps. Includes locking cord and O-rings. Not compatible with the first generation non-locking tubes. If you’re looking for a complete underwater enclosure, check out the Watertight Enclosure Configuration page.
O-Ring Flanges - 50 mm (2")
O-ring sealing flange for the 2″, 3″, 4″, 5″, 6″, and 8″ Watertight Enclosures. These are the second generation of flanges with a locking cord and anti-rotation feature. Compatible with dome end caps, flat end caps, and custom end caps. Includes locking cord and O-rings. Not compatible with the first generation non-locking tubes.
O-Ring Flanges - 75 mm (3")
O-ring sealing flange for the 2″, 3″, 4″, 5″, 6″, and 8″ Watertight Enclosures. These are the second generation of flanges with a locking cord and anti-rotation feature. Compatible with dome end caps, flat end caps, and custom end caps. Includes locking cord and O-rings. Not compatible with the first generation non-locking tubes. If you’re looking for a complete underwater enclosure, check out the Watertight Enclosure Configuration page.
O-Ring Pick
This nylon O-ring pick helps you remove O-rings without scratching or marring the surface of the O-ring groove. It works great with the watertight enclosures and cable penetrators.
Pressure Relief Valve
The Power Sense Module (PSM) provides analog current and voltage sensing to your Navigator Flight Controller or Pixhawk autopilot mounted on your BlueROV2 or custom marine robotics project.
Pressure Relief Valve Backfill Adapter
This Backfill Adapter is for use with the Pressure Relief Valve and the Vacuum Plug to fill an enclosure with an inert gas or to pull an enclosure to vacuum while maintaining a seal!
Short Hex Standoff
The Short Hex Standoff is 31mm and is designed to attach the rear bulkhead of the Electronics Tray to the flange.
Spare Locking Cord and Handles
Spare PTFE locking cord and handles for use with our second generation watertight enclosures with locking features. Includes 1000 mm of cord and four handles.
Spare O-Ring Set - 100 mm (4″)
A spare set of O-rings for replacement or for use on the 2″ Series O-Ring Flange (non-locking version). Contains one face O-ring and two radial O-rings.
Can't see what you need or have a query? Please just get in touch…