Buccaneer
Communication, Control and Power
Subsea Embedded Push Button Switch (Non-Magnetic)
Subsea M10 Embedded Push Button Non-Magnetic Switch is a compact, fully sealed control interface designed for use in underwater systems up to 100 meters deep. Made from corrosion-resistant 316 stainless steel, its non-magnetic construction ensures compatibility with magnetic field-sensitive equipment such as sonar and navigation instruments.
Subsea M10 7-Segment Display
The Blu-Sub 7-Segment LED Display Module is a compact, single-digit readout designed for underwater applications. It features a 0.28-inch common anode LED available in yellow or red, housed in a pressure-resistant aluminum body rated for depths up to 1,000 meters. The module includes an M10×1 threaded interface for secure mounting and comes with a 200mm lead wire and sealing O-ring. A single Blu-Sub Driver Board can support up to four LED Display Modules. An external driver board is required for operation and is sold separately.
Subsea M10 Pressure Trigger Switch
The Subsea M10 Pressure Trigger Switch is a compact, normally open underwater switch that functions either as a manual momentary button or an automatic depth-activated trigger. It is available in two trigger depth versions: 2 Bar / 0.2 MPa (20 m) and 4 Bar / 0.4 MPa (40 m), allowing integration into underwater systems where pressure-based activation is required.
Subsea M10 Rotary Potentiometer
The Subsea M10 Rotary Potentiometer is a sealed underwater adjustment interface designed for precise analog control of devices such as thrusters, lights, and signal inputs. With a depth rating of 1,000 meters and a threaded M10 aluminum housing, it provides reliable, user-adjustable resistance within watertight enclosures.
Subsea M10 Rotary Waveband Switch
The Subsea M10 Rotary Waveband Switch is a compact, multi-position selector switch designed for sealed underwater enclosures. Supporting 3 to 8 selectable positions, it enables channel or circuit switching without opening the housing. A tactile “click” confirms each position as the knob rotates, and the switch allows continuous 360° rotation in either direction.
Subsea M10 Rotary On/Off Switch
The Subsea M10 Rotary On/Off Switch is a rugged, latching underwater switch designed to toggle power or signal circuits inside sealed subsea enclosures. Featuring a two-position rotary mechanism with tactile feedback and audible clicks, it enables reliable manual switching at depths up to 1,000 meters without opening the housing.
Battery Cell Checker
The Battery Cell Checker plugs into the battery balance plug and tells you cell voltages, overall pack voltage, and overall state-of-charge. It’s a great field tool to check your batteries and make sure they are ready for each dive!
Bluart USB to Serial and RS485 Adapter
This compact adapter connects to USB and provides a TTL serial port or RS485 serial port connection. Recommended for use with the Ping Sonar.
BlueBoat Battery Splitter Cables (SPLITTER-CABLE-VP)
These cables allow multiple batteries to be connected for discharge, charge, and balancing. Internal fuses prevent overcurrent, but this product must be used with extreme caution and a knowledge of lithium ion batteries. Only connect identical batteries at the same charge and balance state! Please use this product with caution and read the instructions to avoid risk of fire and injury!
BlueOS MicroSD Card - Configured with AdruSub
This 128 GB micro SD card is preloaded with BlueOS for the Raspberry Pi computer. It can be configured for the BlueROV2 or BlueBoat and can be used with the Navigator Flight Controller or any ArduPilot compatible controller!
Electronics Tray Terminal Blocks and Hardware
Terminal Blocks and Hardware for Electronics Tray (4″ Series).
Ethernet Switch
This compact 5-port Ethernet switch provides expandability to your BlueROV2, BlueBoat, or other vehicle system. It mounts directly on the Fathom-X Tether Interface Board and can be used standalone as well. Designed in collaboration with BotBlox of the UK, this switch is easy to use, requires no configuration, and is reliable under a wide range of conditions!
Fathom-X Tether Interface Board - Pair
The Fathom-X board provides a robust high-speed, long-distance Ethernet connection over a single pair of wires. Enables HD video and high-bandwidth data over 300m+ tether lengths.
Fathom-X Tether Interface Board - Single
The Fathom-X board provides a robust high-speed, long-distance Ethernet connection over a single pair of wires. Enables HD video and high-bandwidth data over 300m+ tether lengths.
H6 PRO Battery Charger Cable (United Kingdom)
AC power cable for the H6 PRO Lithium Battery Charger.
H6 PRO Lithium Battery Charger
The H6 PRO Lithium Battery Charger is a high power AC/DC balance charger perfect for use with our high capacity lithium-ion batteries for the BlueROV2 and BlueBoat!
I2C Bus Splitter
The I2C Bus Splitter allows you to connect more I2C devices by sharing the same bus. It has header pin holes, DF13 connectors, and JST-GH connectors for abundant compatibility with different devices.
Lithium-ion Battery (22.2V, 28Ah)
This Lithium-ion Battery (22.2V, 28Ah), fondly known amongst our team as the MEGA BATTERY, is designed for use in subsea vehicles powered by the T500 Thruster. It fits in our 4″ Series watertight enclosures and has enough power output and capacity for serious ROVs, USVs, and other vehicles! It has a QS8-S connector as well as an adapter for XT90S connections. Not compatible with the BlueROV2!
Can't see what you need or have a query? Please just get in touch…