Buccaneer
Blue Robotics
O-Ring Pick
This nylon O-ring pick helps you remove O-rings without scratching or marring the surface of the O-ring groove. It works great with the watertight enclosures and cable penetrators.
Payload Bracket
This bracket attaches to the mounting holes on the BlueBoat hull to carry payloads below the waterline. A variety of mounting holes give you options to attach sensors or enclosures. Includes mounting hardware to attach to the BlueBoat.
Payload Skid
The Payload Skid is a modular frame for the BlueROV2 with mounting points for additional watertight enclosures, lights, and ballast weights. Use it to carry large payloads and expand functionality!
PCB for Bar02 Ultra High Resolution 10m Depth/Pressure Sensor
This pressure sensor can measure up to 2 bar absolute pressure (10m depth) with a depth resolution of 0.16mm and an in-air altitude resolution of 13cm. This board-level version can be tightly integrated into projects.
PCB for Bar30 High-Resolution 300m Depth/Pressure Sensor
This pressure sensor can measure up to 30 Bar (300m depth) with a depth resolution of 2mm. This board-level version can be tightly integrated into projects.
PCB for Celsius Fast-Response, ±0.1°C Temperature Sensor
This board-level version of the Celsius Temperature Sensor can be tightly integrated into projects or used in dry environments.
Ping Sonar Altimeter and Echosounder
The Ping Sonar is a single beam echosounder that measures distances up to 100 meters underwater. A 25 degree beam width, 300 meter depth rating, and an open-source software interface make it a powerful tool for marine robotics. Can connect directly to the Navigator Flight Controller. For USB connections, we recommend connecting with the BLUART USB to Serial and RS485 Adapter!
Ping360 Scanning Imaging Sonar
The Blue Robotics Ping360 is a mechanical scanning sonar for navigation and imaging. It has a 50 meter (165 foot) range, 300 meter (984 foot) depth rating, and an open-source software interface that makes it a capable tool for ROV navigation and underwater acoustic imaging. The Ping360 comes with everything needed for use on the BlueROV2
Power Sense Module
The Power Sense Module (PSM) provides analog current and voltage sensing to your Navigator Flight Controller or Pixhawk autopilot mounted on your BlueROV2 or custom marine robotics project.
Pressure Relief Valve
The Pressure Relief Valve (PRV) automatically releases any excess pressure built up inside a watertight enclosure. It works automatically, but it can also be opened manually or used to perform a vacuum test on your enclosure! We strongly recommend using the PRV on our locking watertight enclosures and watertight boxes.
Pressure Relief Valve Backfill Adapter
This Backfill Adapter is for use with the Pressure Relief Valve and the Vacuum Plug to fill an enclosure with an inert gas or to pull an enclosure to vacuum while maintaining a seal!
Propeller Set - T200 Thruster - Black
A set of spare replacement propellers for the T200 thruster. Contains one clockwise propeller, one counter-clockwise propeller and mounting screws
Propeller Set - T200 Thruster - Blue
A set of spare replacement propellers for the T200 thruster. Contains one clockwise propeller, one counter-clockwise propeller and mounting screws.
Propeller Set - T200 Thruster - Orange
A set of spare replacement propellers for the T200 thruster. Contains one clockwise propeller, one counter-clockwise propeller and mounting screws.
Propeller Set - T200 Thruster - Yellow
A set of spare replacement propellers for the T200 thruster. Contains one clockwise propeller, one counter-clockwise propeller and mounting screws.
Propeller Set - T500 Thruster - Black
A set of spare replacement propellers for the T500 thruster. Contains one clockwise propeller, one counter-clockwise propeller and mounting screws.
Propeller Set - T500 Thruster - Blue
A set of spare replacement propellers for the T500 thruster. Contains one clockwise propeller, one counter-clockwise propeller and mounting screws.
Propeller Set - T500 Thruster - Orange
A set of spare replacement propellers for the T500 thruster. Contains one clockwise propeller, one counter-clockwise propeller and mounting screws.
Can't see what you need or have a query? Please just get in touch…