Buccaneer
Blue Robotics
Propeller Set - T500 Thruster - Yellow
A set of spare replacement propellers for the T500 thruster. Contains one clockwise propeller, one counter-clockwise propeller and mounting screws.
QS8-S Connector Set
The QS8-S connector is a high power electrical connector. It’s used on our 6S 28Ah Lithium-ion Battery and provides 110A continuous discharge rating. Comes as a set with male and female connectors and covers for the wire connections. Soldering is required for assembly.
Raspberry Pi 4
The Raspberry Pi 4 Model B is the powerful mini computer used in the Navigator Flight Controller and on the BlueROV2.
RJ45 to JST-GH Adapter Board
This RJ45 to JST GH adapter provides an additional RJ45 Ethernet port on the Ethernet Switch. It comes with a 150 mm twisted pair cable and is compatible with the Blue Robotics Connector Standard.
ROV Power Supply Enclosure for OTPS
This is a component of the Outland Technology Power Supply. The ROV enclosure replaces the ROV’s battery enclosure and converts 400 VDC power from the tether to 15 VDC power for the ROV. As possibly worldwide we are the only Blue Robotics distributor, that is also a Outland Technology distributor we can offer unrivalled support on this product line For a complete system, You need the topside power and one of OTPS tether options
Short Hex Standoff
The Short Hex Standoff is 31mm and is designed to attach the rear bulkhead of the Electronics Tray to the flange.
Sonoptix ECHO Multibeam Imaging Sonar
The Sonoptix ECHO is a high performance multibeam imaging sonar at a game-changing price point. Its dual frequency capability provides fine resolution at short ranges and imaging at long ranges up to 200 meters. An intuitive, cross-platform user interface and pre-installed penetrator and connectors make it easy to get started! Requires an Ethernet Switch for use on the BlueROV2.
SOS Leak Sensor
The SOS Leak Sensor can detect water leaking into an improperly sealed Watertight Enclosure quickly and reliably, before any major damage can occur!
SOS Probe Tips
These extra probe tips for your SOS Leak Sensor probes let you replace old and worn probes tips that have been exposed to water multiple times.
SOS Probes - 12 inch single tip
These extra probes for your SOS Leak Sensor let you get to those hard to reach places in your watertight enclosure! You can choose extra 6″ or 12″ probes for you leak detection setup.
SOS Probes - 6 inch single tip
These extra probes for your SOS Leak Sensor let you get to those hard to reach places in your watertight enclosure! You can choose extra 6″ or 12″ probes for you leak detection setup.
Spare Locking Cord and Handles
Spare PTFE locking cord and handles for use with our second generation watertight enclosures with locking features. Includes 1000 mm of cord and four handles.
Spare O-Ring Set (6" Series) Non-Locking)
This spare set of O-rings is for replacement or for use on 6″ Series O-ring Flange. Contains one face O-ring and two radial O-rings.
Spare O-Ring Set (8" Series) Non Locking
This spare set of O-rings is for replacement or for use on 8″ Series O-ring Flange. Contains one face O-ring and two radial O-rings.
Stainless Steel Ballast Weight (200 g, 7 oz)
This 200g (7 oz) stainless steel ballast weight is compact and has a screw hole for easy mounting.
Subsea Buoyancy Foam: R-3312
Subsea Buoyancy Foam for use on ROVs, AUVs, and other marine robotics applications. This foam can be machined, glued, painted, and coated to build any size or shape of float that you want.
Subsea Buoyancy Foam: R-3318
Subsea Buoyancy Foam for use on ROVs, AUVs, and other marine robotics applications. This foam can be machined, glued, painted, and coated to build any size or shape of float that you want.
Subsea LED Indicator
This Subsea LED Indicator light comes in four colors and provides a high pressure on/off or status indicator light. If you’re looking for an indicator that can do any color, check out our Subsea RGB LED Indicator.
Subsea RGB LED Indicator
Unlike our other Subsea Indicators, which display only one of four discrete colors, the Subsea RGB LED Indicator can produce over 16 million colors! It provides a simple way to add a status light to underwater enclosures or other hardware. It can be daisy-chained to control multiple indicators from a single output.
Switch
This switch allows you to turn a circuit on and off inside a watertight enclosure without needing to open it! Handles up to 5A.
Can't see what you need or have a query? Please just get in touch…