Buccaneer
Blue Robotics
Hex Key Set
This hex key set includes 1.5mm, 2mm, 2.5mm, and 3mm hex keys needed for the screws on most of our products. They are blue to set them apart from your other tools!
High-Temperature PUR Subsea Cable (by the meter) - High Power Cable (2 conductors, 12 AWG)
These cables are built specifically for use underwater and used in our products! A polyurethane jacket, PTFE tape, and FEP insulated conductors make for a rugged cable that can carry a lot of power. Sold by the meter (3.3 ft) and cut to length when you order.
High-Temperature PUR Subsea Cable (by the meter) - Ping360 Cable (3 UTP, 28 AWG)
These cables are built specifically for use underwater and used in our products! A polyurethane jacket, PTFE tape, and FEP insulated conductors make for a rugged cable that can carry a lot of power. Sold by the meter (3.3 ft) and cut to length when you order.
High-Temperature PUR Subsea Cable (by the meter) - T200 Thruster Cable (3 conductors, 16 AWG)
These cables are built specifically for use underwater and used in our products! A polyurethane jacket, PTFE tape, and FEP insulated conductors make for a rugged cable that can carry a lot of power. Sold by the meter (3.3 ft) and cut to length when you order.
High-Temperature PUR Subsea Cable(by the meter) - T500 (3 conductors, 12 AWG)
These cables are built specifically for use underwater and used in our products! A polyurethane jacket, PTFE tape, and FEP insulated conductors make for a rugged cable that can carry a lot of power. Sold by the meter (3.3 ft) and cut to length when you order.
I2C Bus Splitter
The I2C Bus Splitter allows you to connect more I2C devices by sharing the same bus. It has header pin holes, DF13 connectors, and JST-GH connectors for abundant compatibility with different devices.
I2C Level Converter
The I2C Level Converter allows you to run 3.3v logic sensors like the Bar30 or Celsius and other accessories off of a 5v logic device like the Arduino Uno!
Lithium-ion Battery (22.2V, 28Ah)
This Lithium-ion Battery (22.2V, 28Ah), fondly known amongst our team as the MEGA BATTERY, is designed for use in subsea vehicles powered by the T500 Thruster. It fits in our 4″ Series watertight enclosures and has enough power output and capacity for serious ROVs, USVs, and other vehicles! It has a QS8-S connector as well as an adapter for XT90S connections. Not compatible with the BlueROV2!
Lithium-ion Battery (Black)
The Lithium-ion Battery (14.8V, 18Ah) is a high capacity custom battery pack made from high quality 18650 lithium-ion cells designed for use in the BlueROV2, BlueBoat, and fits perfectly inside a 3″ Watertight Enclosure!
Long Hex Standoff
The Long Hex Standoff is 212mm and is used to attach the front bulkhead to the rear bulkhead on the Electronics Tray.
Low-Light HD USB Camera
This digital HD USB camera has excellent low-light performance, onboard compression, and a specially chosen lens to provide fantastic video quality on ROVs and other subsea applications!
Lumen Subsea Light (Pre-Connected Sets) (Number of Lights - 2)
These are pre-connected (daisy-chained) sets of Blue Robotics Lumen Subsea Lights, making it easy to install two or four lights with a single penetrator to the watertight enclosure. All lights will respond to a single signal. See here for the individual Lumen Lights.
Lumen Subsea Light (Pre-Connected Sets) (Number of Lights - 4)
These are pre-connected (daisy-chained) sets of Blue Robotics Lumen Subsea Lights, making it easy to install two or four lights with a single penetrator to the watertight enclosure. All lights will respond to a single signal. See here for the individual Lumen Lights.
Lumen Subsea Light for ROV/AUV
A 1500 lumen subsea LED light with servo signal control, daisy-chain connection for multiple lights, and smart over-temp protection.
M10 Enclosure Vent and Plug
This vent allows trapped pressure to escape from an enclosure after it has been closed. It includes a threaded plug with a double O-ring seal to open and close the vent.
M200 Motor - BlueBoat - 0.71 meter cable length + M14 WLP
The M200 Motor is a subsea motor designed to run in harsh ocean conditions. It has the same performance as the T200 Thruster, but without a nozzle, making it perfect for use on USVs (like the BlueBoat), AUVs, and in custom projects such as actuators and subsea tooling. It requires a speed controller for operation.
M200 Motor - Standard - 1 meter cable length
The M200 Motor is a subsea motor designed to run in harsh ocean conditions. It has the same performance as the T200 Thruster, but without a nozzle, making it perfect for use on USVs (like the BlueBoat), AUVs, and in custom projects such as actuators and subsea tooling. It requires a speed controller for operation.
Micro-USB to USB-A Cable (6" Left Angle)
This left angle Micro-USB to USB-A Cable is designed to easily connect small devices where space is limited. It’s used in the R1, R2, and R3 BlueROV2 to connect the Raspberry Pi computer to the Pixhawk autopilot.
Micro-USB to USB-A Cable (6" Straight)
This straight Micro-USB to USB-A Cable is designed to easily connect small devices where space is limited.
Can't see what you need or have a query? Please just get in touch…