Blue Robotics

Mityvac Hand Operated Vacuum Pump

This hand-operated vacuum pump with gauge makes it easy to verify the seals on a watertight enclosure. Comes with hose and vacuum adapter compatible with the Pressure Relief Valve and Vent.

Moisture Indicating Silica Gel Desiccant

Moisture Indicating Silica Gel Desiccant that eliminates humidity and prevents condensation within the enclosure.

Molykote 111 - 150 g Tube

This Molykote 111 silicone grease works great to lubricate O-rings and other seals to make sure that they do their job!

Molykote 111 - 6 g Pillow Pack

This Molykote 111 silicone grease works great to lubricate O-rings and other seals to make sure that they do their job!

Mount for USB Camera

This camera mount holds the Low-Light HD USB Camera on the Camera Tilt System.

Navigator Flight Controller

The Navigator is an ROV and robotics flight controller for the Raspberry Pi 4. It has an onboard IMU, compass, barometer, and ADC sensors as well as 16 PWM outputs and numerous serial and I2C expansion ports. The Navigator is used on the BlueROV2 and BlueBoat in conjunction with the BlueOS software, but can also be used for a wide range of robotics applications!

NavLight

The NavLight is a bright white LED light that’s visible at night and during the day. It has an input signal that can be controlled by a microcontroller and can be used for USVs, buoys, or underwater with a 1,000 meter depth rating. It has an M14 thread for panel mount installation.

Newton Subsea Gripper

The Newton Gripper provides the BlueROV2 and other subsea vehicles with the ability to interact with the subsea environment to retrieve objects, attach recovery lines, or free a snagged tether! Includes everything needed for installation on the BlueROV2.

O-Ring Flange (6″ Series)

This flange with an O-ring seal fits the tube for the 6″ Watertight Enclosure. Comes with O-rings.

O-Ring Flange (8″ Series)

This flange with an O-ring seal fits the tube for the 8″ Watertight Enclosure. Comes with O-rings.

O-ring Flanges - 100 mm (4")

O-ring sealing flange for the 4″ Watertight Enclosures. These are the second generation of flanges with a locking cord and anti-rotation feature. Compatible with dome end caps, flat end caps, and custom end caps. Includes locking cord and O-rings. Not compatible with the first generation non-locking tubes. If you’re looking for a complete underwater enclosure, check out the Watertight Enclosure Configuration page.

O-Ring Flanges - 50 mm (2")

O-ring sealing flange for the 2″, 3″, 4″, 5″, 6″, and 8″ Watertight Enclosures. These are the second generation of flanges with a locking cord and anti-rotation feature. Compatible with dome end caps, flat end caps, and custom end caps. Includes locking cord and O-rings. Not compatible with the first generation non-locking tubes.

O-Ring Flanges - 75 mm (3")

O-ring sealing flange for the 2″, 3″, 4″, 5″, 6″, and 8″ Watertight Enclosures. These are the second generation of flanges with a locking cord and anti-rotation feature. Compatible with dome end caps, flat end caps, and custom end caps. Includes locking cord and O-rings. Not compatible with the first generation non-locking tubes. If you’re looking for a complete underwater enclosure, check out the Watertight Enclosure Configuration page.

O-Ring Pick

This nylon O-ring pick helps you remove O-rings without scratching or marring the surface of the O-ring groove. It works great with the watertight enclosures and cable penetrators.

O-Ring Set for M10 Cable Penetrators

OTPS High Power Tether for BlueROV2

The High-Power Tether Cable with Connectors

Payload Bracket

This bracket attaches to the mounting holes on the BlueBoat hull to carry payloads below the waterline. A variety of mounting holes give you options to attach sensors or enclosures. Includes mounting hardware to attach to the BlueBoat.

Payload Skid

The Payload Skid is a modular frame for the BlueROV2 with mounting points for additional watertight enclosures, lights, and ballast weights. Use it to carry large payloads and expand functionality!

PCB for Bar02 Ultra High Resolution 10m Depth/Pressure Sensor

This pressure sensor can measure up to 2 bar absolute pressure (10m depth) with a depth resolution of 0.16mm and an in-air altitude resolution of 13cm. This board-level version can be tightly integrated into projects.

PCB for Bar30 High-Resolution 300m Depth/Pressure Sensor

This pressure sensor can measure up to 30 Bar (300m depth) with a depth resolution of 2mm. This board-level version can be tightly integrated into projects.