Buccaneer
Blue Robotics
Long Hex Standoff
The Long Hex Standoff is 212mm and is used to attach the front bulkhead to the rear bulkhead on the Electronics Tray.
Low-Light HD USB Camera
This digital HD USB camera has excellent low-light performance, onboard compression, and a specially chosen lens to provide fantastic video quality on ROVs and other subsea applications!
Lumen Subsea Light (Pre-Connected Sets) (Number of Lights - 2)
These are pre-connected (daisy-chained) sets of Blue Robotics Lumen Subsea Lights, making it easy to install two or four lights with a single penetrator to the watertight enclosure. All lights will respond to a single signal. See here for the individual Lumen Lights.
Lumen Subsea Light (Pre-Connected Sets) (Number of Lights - 4)
These are pre-connected (daisy-chained) sets of Blue Robotics Lumen Subsea Lights, making it easy to install two or four lights with a single penetrator to the watertight enclosure. All lights will respond to a single signal. See here for the individual Lumen Lights.
Lumen Subsea Light for ROV/AUV
A 1500 lumen subsea LED light with servo signal control, daisy-chain connection for multiple lights, and smart over-temp protection.
M10 Enclosure Vent and Plug
This vent allows trapped pressure to escape from an enclosure after it has been closed. It includes a threaded plug with a double O-ring seal to open and close the vent.
M200 Motor - BlueBoat - 0.71 meter cable length + M14 WLP
The M200 Motor is a subsea motor designed to run in harsh ocean conditions. It has the same performance as the T200 Thruster, but without a nozzle, making it perfect for use on USVs (like the BlueBoat), AUVs, and in custom projects such as actuators and subsea tooling. It requires a speed controller for operation.
M200 Motor - Standard - 1 meter cable length
The M200 Motor is a subsea motor designed to run in harsh ocean conditions. It has the same performance as the T200 Thruster, but without a nozzle, making it perfect for use on USVs (like the BlueBoat), AUVs, and in custom projects such as actuators and subsea tooling. It requires a speed controller for operation.
Micro-USB to USB-A Cable (6" Left Angle)
This left angle Micro-USB to USB-A Cable is designed to easily connect small devices where space is limited. It’s used in the R1, R2, and R3 BlueROV2 to connect the Raspberry Pi computer to the Pixhawk autopilot.
Micro-USB to USB-A Cable (6" Straight)
This straight Micro-USB to USB-A Cable is designed to easily connect small devices where space is limited.
Mityvac Hand Operated Vacuum Pump
This hand-operated vacuum pump with gauge makes it easy to verify the seals on a watertight enclosure. Comes with hose and vacuum adapter compatible with the Pressure Relief Valve and Vent.
Moisture Indicating Silica Gel Desiccant
Moisture Indicating Silica Gel Desiccant that eliminates humidity and prevents condensation within the enclosure.
Molykote 111 - 150 g Tube
This Molykote 111 silicone grease works great to lubricate O-rings and other seals to make sure that they do their job!
Molykote 111 - 6 g Pillow Pack
This Molykote 111 silicone grease works great to lubricate O-rings and other seals to make sure that they do their job!
Mount for USB Camera
This camera mount holds the Low-Light HD USB Camera on the Camera Tilt System.
Navigator Flight Controller
The Navigator is an ROV and robotics flight controller for the Raspberry Pi 4. It has an onboard IMU, compass, barometer, and ADC sensors as well as 16 PWM outputs and numerous serial and I2C expansion ports. The Navigator is used on the BlueROV2 and BlueBoat in conjunction with the BlueOS software, but can also be used for a wide range of robotics applications!
NavLight
The NavLight is a bright white LED light that’s visible at night and during the day. It has an input signal that can be controlled by a microcontroller and can be used for USVs, buoys, or underwater with a 1,000 meter depth rating. It has an M14 thread for panel mount installation.
Newton Subsea Gripper
The Newton Gripper provides the BlueROV2 and other subsea vehicles with the ability to interact with the subsea environment to retrieve objects, attach recovery lines, or free a snagged tether! Includes everything needed for installation on the BlueROV2.
O-Ring Flange (6″ Series) Non-Locking
This flange with an O-ring seal fits the tube for the 6″ Watertight Enclosure. Comes with O-rings.
O-Ring Flange (8″ Series) Non-Locking
This flange with an O-ring seal fits the tube for the 8″ Watertight Enclosure. Comes with O-rings.
Can't see what you need or have a query? Please just get in touch…