Buccaneer
Blue Robotics
T500 Spare Components - T500 Rotor
This is a replacement rotor for the T500 Thruster.
T500 Spare Components - T500 Thruster Core
Replacement components for the T500 Thruster including the T500 Rotor, Nozzle, and Core.
T500 Thruster
The T500 Thruster is our next-generation underwater thruster with three times more thrust than the T200 Thruster. With a 24V / 43.5A power rating, high efficiency, and ruggedized design, it is an ideal choice for high-power ROVs, surface vessels, AUVs, and more! It comes with a pre-installed WetLink Penetrator for rapid integration into your system.
Tether Cable Thimble
This tether cable thimble provides a secure attachment point for the tether cable and carries any tension directly to your ROV’s frame. Includes zip ties for installation.
Thruster Commander
The Thruster Commander makes it easy to get started with our thrusters and speed controllers. It comes with a control unit, potentiometers, knobs, cables, and terminal blocks to get thrusting quickly!
Topside Power Supply Unit for OTPS
This is a component of the Outland Technology Power Supply. It connects to standard 100-240 VAC power outlet and delivers 400 VDC power through the tether. With exceptional design the built-in GFI/LIM circuitry automatically shuts off the power output if unsafe current leakage is detected.
Underwater Robotics: Science, Design & Fabrication *The Reef
Underwater Robotics is a fantastic book covering a wide range of ROV/AUV topics and knowledge levels from beginner to advanced!
Vacuum Plug
Test the watertight seal on your enclosure with this vacuum plug attachment, which connects to a hand vacuum pump and inserts into the enclosure vent. Comes with O-rings and a rubber stopper for testing. - Please note this is the NEW version there is an OLD version available which is NOT compatible with current M10 Vents and plugs, if you are in doubt or require the OLD version please contact us as we do hold stock of both versions
Vent Plug
Have you misplaced your Vent Plug for your Enclosure Vent and Plug? No problem!
Water Linked DVL A50
Water Linked’s doppler velocity logs (DVLs) provide accurate velocity measurements for your vehicle, enabling position holding and autonomous navigation capabilities in the BlueROV2 and other vehicles. The DVL A50 is the world’s smallest DVL and operates from 5 cm to 50 m above the seabed at depths up to 300 m. The DVL A125 is larger and more capable, extending the range to 125 m with a 600 m depth rating. Both have a ±1% long term accuracy. Please contact us for A125 pricing information or for a DVL for use with other ROV systems as we are Waterlinked main distributors also
Water Linked DVL A50 Mounting Bracket
This stainless steel bracket holds the Water Linked DVL A50 or A125 on the BlueROV2, raising it so that the minimum distance to the seafloor is always greater than 5 cm and the DVL is able to maintain an accurate position at all times. It comes with all necessary mounting hardware.
Watertight Enclosure End Caps (6" Series) - Non-Locking Series
End caps and flange caps for the 2″, 3″, 4″, 5″, 6″, and 8″ Series Watertight Enclosures. These are the second generation of these end caps and flange caps with precision machined O-ring interfaces, a locking cord, anti-rotation feature, and optional M10 holes for cable penetrators. Rated to depths up to 1000 meters.
Watertight Enclosure End Caps (8″ Series) - Non-Locking series
End caps and flange caps for the 2″, 3″, 4″, 5″, 6″, and 8″ Series Watertight Enclosures. These are the second generation of these end caps and flange caps with precision machined O-ring interfaces, a locking cord, anti-rotation feature, and optional M10 holes for cable penetrators. Rated to depths up to 1000 meters.
Watertight Enclosure End Caps, Domes, and Flange Caps - 100 mm (4")
End caps and flange caps for the 2″, 3″, 4″, 5″, 6″, and 8″ Series Watertight Enclosures. These are the second generation of these end caps and flange caps with precision machined O-ring interfaces, a locking cord, anti-rotation feature, and optional M10 holes for cable penetrators. Rated to depths up to 1000 meters.
Watertight Enclosure End Caps, Domes, and Flange Caps - 50 mm (2")
End caps and flange caps for the 2″, 3″, 4″, 5″, 6″, and 8″ Series Watertight Enclosures. These are the second generation of these end caps and flange caps with precision machined O-ring interfaces, a locking cord, anti-rotation feature, and optional M10 holes for cable penetrators. Rated to depths up to 1000 meters.
Watertight Enclosure End Caps, Domes, and Flange Caps - 75 mm (3")
End caps and flange caps for the 2″, 3″, 4″, 5″, 6″, and 8″ Series Watertight Enclosures. These are the second generation of these end caps and flange caps with precision machined O-ring interfaces, a locking cord, anti-rotation feature, and optional M10 holes for cable penetrators. Rated to depths up to 1000 meters.
Weedless Propeller
Compatible with the M200 Motor, the weedless propeller has long, swept blades that generate significant thrust and speed without getting snagged on weeds, plastic bags, or other marine debris. These propellers are used on the BlueBoat, but can be used with the M200 Motor on USVs, UUVs, and more!
WetLink Assembly Block
The tool holds the WetLink Penetrator bulkhead during assembly and is compatible with M06, M10, and M14 bulkhead sizes. It’s designed to fit in a vise or be bolted to a table. We recommend using it with the WetLink Plug Wrench.
WetLink Bulkhead Wrench - M06
Easily and securely tighten cable penetrators and bulkheads in tight quarters with this specially designed wrench! It’s made of hardened tool steel for a long life and has a square drive socket adapter to be used with a socket wrench.
WetLink Bulkhead Wrench - M10
Easily and securely tighten cable penetrators and bulkheads in tight quarters with this specially designed wrench! It’s made of hardened tool steel for a long life and has a square drive socket adapter to be used with a socket wrench.
Can't see what you need or have a query? Please just get in touch…