Buccaneer
Communication, Control, and Power
Battery Cell Checker
The Battery Cell Checker plugs into the battery balance plug and tells you cell voltages, overall pack voltage, and overall state-of-charge. It’s a great field tool to check your batteries and make sure they are ready for each dive!
Bluart USB to Serial and RS485 Adapter
This compact adapter connects to USB and provides a TTL serial port or RS485 serial port connection. Recommended for use with the Ping Sonar.
BlueBoat Battery Splitter Cables (SPLITTER-CABLE-VP)
These cables allow multiple batteries to be connected for discharge, charge, and balancing. Internal fuses prevent overcurrent, but this product must be used with extreme caution and a knowledge of lithium ion batteries. Only connect identical batteries at the same charge and balance state! Please use this product with caution and read the instructions to avoid risk of fire and injury!
BlueOS MicroSD Card - Configured with AdruSub
This 128 GB micro SD card is preloaded with BlueOS for the Raspberry Pi computer. It can be configured for the BlueROV2 or BlueBoat and can be used with the Navigator Flight Controller or any ArduPilot compatible controller!
Electronics Tray Terminal Blocks and Hardware
Terminal Blocks and Hardware for Electronics Tray (4″ Series).
Ethernet Switch
This compact 5-port Ethernet switch provides expandability to your BlueROV2, BlueBoat, or other vehicle system. It mounts directly on the Fathom-X Tether Interface Board and can be used standalone as well. Designed in collaboration with BotBlox of the UK, this switch is easy to use, requires no configuration, and is reliable under a wide range of conditions!
Fathom-X Tether Interface Board - Pair
The Fathom-X board provides a robust high-speed, long-distance Ethernet connection over a single pair of wires. Enables HD video and high-bandwidth data over 300m+ tether lengths.
Fathom-X Tether Interface Board - Single
The Fathom-X board provides a robust high-speed, long-distance Ethernet connection over a single pair of wires. Enables HD video and high-bandwidth data over 300m+ tether lengths.
H6 PRO Battery Charger Cable (United Kingdom)
AC power cable for the H6 PRO Lithium Battery Charger.
H6 PRO Lithium Battery Charger
The H6 PRO Lithium Battery Charger is a high power AC/DC balance charger perfect for use with our high capacity lithium-ion batteries for the BlueROV2 and BlueBoat!
I2C Bus Splitter
The I2C Bus Splitter allows you to connect more I2C devices by sharing the same bus. It has header pin holes, DF13 connectors, and JST-GH connectors for abundant compatibility with different devices.
Lithium-ion Battery (22.2V, 28Ah)
This Lithium-ion Battery (22.2V, 28Ah), fondly known amongst our team as the MEGA BATTERY, is designed for use in subsea vehicles powered by the T500 Thruster. It fits in our 4″ Series watertight enclosures and has enough power output and capacity for serious ROVs, USVs, and other vehicles! It has a QS8-S connector as well as an adapter for XT90S connections. Not compatible with the BlueROV2!
Lithium-ion Battery (Black)
The Lithium-ion Battery (14.8V, 18Ah) is a high capacity custom battery pack made from high quality 18650 lithium-ion cells designed for use in the BlueROV2, BlueBoat, and fits perfectly inside a 3″ Watertight Enclosure!
Micro-USB to USB-A Cable (6" Left Angle)
This left angle Micro-USB to USB-A Cable is designed to easily connect small devices where space is limited. It’s used in the R1, R2, and R3 BlueROV2 to connect the Raspberry Pi computer to the Pixhawk autopilot.
Micro-USB to USB-A Cable (6" Straight)
This straight Micro-USB to USB-A Cable is designed to easily connect small devices where space is limited.
Navigator Flight Controller
The Navigator is an ROV and robotics flight controller for the Raspberry Pi 4. It has an onboard IMU, compass, barometer, and ADC sensors as well as 16 PWM outputs and numerous serial and I2C expansion ports. The Navigator is used on the BlueROV2 and BlueBoat in conjunction with the BlueOS software, but can also be used for a wide range of robotics applications!
Power Sense Module
The Power Sense Module (PSM) provides analog current and voltage sensing to your Navigator Flight Controller or Pixhawk autopilot mounted on your BlueROV2 or custom marine robotics project.
Can't see what you need or have a query? Please just get in touch…