Cables, Penetrators and Connectors

High-Temperature PUR Subsea Cable(by the meter) - T500 (3 conductors, 12 AWG)

These cables are built specifically for use underwater and used in our products! A polyurethane jacket, PTFE tape, and FEP insulated conductors make for a rugged cable that can carry a lot of power. Sold by the meter (3.3 ft) and cut to length when you order.

High-Temperature PUR Subsea Cable (by the meter) - Ping360 Cable (3 UTP, 28 AWG)

These cables are built specifically for use underwater and used in our products! A polyurethane jacket, PTFE tape, and FEP insulated conductors make for a rugged cable that can carry a lot of power. Sold by the meter (3.3 ft) and cut to length when you order.

High-Temperature PUR Subsea Cable (by the meter) - High Power Cable (2 conductors, 12 AWG)

These cables are built specifically for use underwater and used in our products! A polyurethane jacket, PTFE tape, and FEP insulated conductors make for a rugged cable that can carry a lot of power. Sold by the meter (3.3 ft) and cut to length when you order.

High-Temperature PUR Subsea Cable (by the meter) - T200 Thruster Cable (3 conductors, 16 AWG)

These cables are built specifically for use underwater and used in our products! A polyurethane jacket, PTFE tape, and FEP insulated conductors make for a rugged cable that can carry a lot of power. Sold by the meter (3.3 ft) and cut to length when you order.

PUR Subsea Cable -(by the meter) Lumen/Gripper Cable (3 conductors, 22 AWG)

This 3-conductor cable is used on the Lumen Subsea Lights and the Newton Gripper. A polyurethane jacket and polypropylene-insulated 22 AWG conductors make for a rugged cable. It’s compatible with the WLP-M06-4.5MM-LC and WLP-M10-4.5MM-LC WetLink Penetrator.

PUR Subsea Cable - (by the meter) Ping Cable (4 conductors, 24 AWG) (by the meter)

This 4-conductor cable is used on the Ping Echosounder. The cable is made with a pressure-extruded polyurethane jacket and flexible 24 AWG conductors. It’s compatible with the WLP-M06-4.5MM-LC and WLP-M10-4.5MM-LC WetLink Penetrator.

PUR Subsea Cable - (by the meter) Ethernet and Power Cable (2 x 22AWG, 4x UTP 26 AWG)

This cable has separate wires for Ethernet and power transmission, making it a useful cable for many different types of underwater connections! Ethernet is unshielded 26 AWG twisted pairs and the power is thicker 22 AWG to handle higher current applications. It’s compatible with the WLP-M10-7.5MM-LC WetLink Penetrator.

Spare Bulkhead O-Ring Set - M06

A spare set of O-rings for use with any of our M06, M10, or M14 threaded bulkheads, including the WetLink Penetrator, the Bar30 Depth/Pressure Sensor, the Celsius Temperature Sensor, and more! Contains 10 O-rings.

Spare Bulkhead O-Ring Set - M10

A spare set of O-rings for use with any of our M06, M10, or M14 threaded bulkheads, including the WetLink Penetrator, the Bar30 Depth/Pressure Sensor, the Celsius Temperature Sensor, and more! Contains 10 O-rings.

Spare Bulkhead O-Ring Set - M14

A spare set of O-rings for use with any of our M06, M10, or M14 threaded bulkheads, including the WetLink Penetrator, the Bar30 Depth/Pressure Sensor, the Celsius Temperature Sensor, and more! Contains 10 O-rings.

Subsea Embedded Push Button Switch (Non-Magnetic)

Subsea M10 Embedded Push Button Non-Magnetic Switch is a compact, fully sealed control interface designed for use in underwater systems up to 100 meters deep. Made from corrosion-resistant 316 stainless steel, its non-magnetic construction ensures compatibility with magnetic field-sensitive equipment such as sonar and navigation instruments.

Subsea M10 7-Segment Display

The Blu-Sub 7-Segment LED Display Module is a compact, single-digit readout designed for underwater applications. It features a 0.28-inch common anode LED available in yellow or red, housed in a pressure-resistant aluminum body rated for depths up to 1,000 meters. The module includes an M10×1 threaded interface for secure mounting and comes with a 200mm lead wire and sealing O-ring. A single Blu-Sub Driver Board can support up to four LED Display Modules. An external driver board is required for operation and is sold separately.

Subsea M10 Rotary Potentiometer

The Subsea M10 Rotary Potentiometer is a sealed underwater adjustment interface designed for precise analog control of devices such as thrusters, lights, and signal inputs. With a depth rating of 1,000 meters and a threaded M10 aluminum housing, it provides reliable, user-adjustable resistance within watertight enclosures.

Binder 770 Bulkhead Connector

This Binder 770 bulkhead connector is our standard for tether connections above the water. This connector can be mounted in a spare hole on the FXTI for your custom connections.

Binder 770 Plug (2.5-4mm)

This Binder 770 connector is our standard for tether connections above the water. Some assembly with soldering required for installation.

Binder 770 Plug (6-8mm)

Cable Jacket Stripper

This cable jacket stripper is designed for fast and easy removal of cable jackets! Can make circular, spiral, and longitudinal cuts.

Cable Repair Kit

This kit contains moldable cable sealing compound, silicone tape, and acetone wipes to seal cuts or nicks in cable jackets so you can keep diving! Comes with a hardshell case that’s ready to toss in your tool bag. Check out our guide for more info on usage.

Fathom Spool Connector Guard

This anodized aluminium guard protects the Binder connector on the Fathom Spool. It is included with all spools beginning 27 January 2022 and can be retrofitted on existing kits.

M10 Enclosure Vent and Plug

This vent allows trapped pressure to escape from an enclosure after it has been closed. It includes a threaded plug with a double O-ring seal to open and close the vent.